Smartbitt SBNB500 Manual De Usuario página 14

Important Safe Notice.
User Manual's UPS.
Read all the safety instructions carefully to correctly
and safely use and operate Smartbitt UPS
To avoid electric shock hazard or fire risk, place your UPS in an area where temperature and humidity
doesn't exceed the operative parameters of your UPS, and make sure the environment is free of
conductive or combustible contaminants.
To reduce overheating risk of your UPS, do not cover the ventilation slots, avoid continuous exposure
to direct sunlight and don't place it near appliances that produce heat like heaters or boilers.
Do not connect devices or appliances functioning with alternating current motors, like drills, chainsaws,
microwaves, vacuum cleaners, refrigerators, neither medical, vital support or industrial equipment.
Do not connect your UPS to a surge protector, power strip or AVR.
Do not power on your UPS with its power cord connected to its own power outlets.
Do not expose to liquids which may leak inside the device.
In case of emergency, press the power button making sure that the UPS shuts down, then disconnect
its power cord from the AC outlet.
Disconnect the UPS before cleaning it, do not use liquid detergent or scouring powder.
Do not try to replace batteries, please contact Smartbitt Technical Support to get information about
batteries replacement. Only qualified personal should replace batteries in case it is required.
Replacement must be done with caution. The same kind and capacity of batteries shall be used.
Non authorized personal should abstain from making the replacement.
Batteries must not be exposed to fire and have to be disposed of properly. Mistreat of the batteries can
cause them to explode.
The materials contained inside the batteries is dangerous for eyes and skin, in case of contact with these
material, rinse thoroughly and consult your doctor immediately.
13 / EN