Smartbitt SBNB500 Manual De Usuario página 18

Installation and Operation.
User Manual's UPS.
20 CM
DO NOT CONNECT A POWER STRIP, SURGE PROTECTOR OR AVR
TO THE UPS OUTLETS.
Installation and Storage
Conditions.
Place your UPS in a protected area, free from excesive dust and
adequate ventilation. To avoid any interference, do not place
your UPS less than 20 cms away from other devices.
Do not power on your UPS where temperature exceeds 40°C
degrees or relative humidity is above 90%.
Connection to power outlet and first
battery charge.
Connect the plug of your UPS to the power outlet. To get the best
performance of the battery, we suggest to charge it for 8 hours
before its first use, afterwards, the UPS will charge its battery
automatically while it's connected to the electrical network.
Power on/off of the UPS
Hold the power button for 3 seconds for either power on or shut
down your UPS.
Connection of your devices
to the UPS
Connect your devices to the power outlets on the rear panel of
your UPS. After this, when you power on your UPS your devices
will be protected.
17 / EN