Cleaning - Luvion Doppler Deluxe 80 Manual De Instrucciones

CLEANING AND DESINFECTION

Cleaning

Before cleaning, switch off and take out the batteries.
Keep the outside surface of the device clean and free of dust and dirt,
clean exterior surface of the chassis with a dry, soft cloth. If necessary,
clean the chassis with a soft cloth soaked in a solution of soap, or water
and wipe dry with a clean cloth immediately.
Note: Wipe the surface of probe with 70% ethanol , self-air dry, or clean
with a clean, dry cloth.
Desinfection
1. Don't use strong solvent, such as acetone.
2. Never use an abrasive such as steel wool or metal polish.
3. Do not allow any liquid to enter the product, and do not immerse
any parts of the device into any liquids.
4. Avoid pouring liquids on the device while cleaning.
5. Don't remain any cleaning solution on the surface of the device.
Note:
1. Never try to sterilize the equipment by low temperature steam or
other methods.
2. Do not use high temperature sterilizing process and E-beam or
gamma radiation sterilization.
26