Important Safety Instructions - GBS ShredMaster Serie Manual De Instrucciones

ShredMaster
Specifications
Models
Cutting Style
Throat Width
Shred Width
Sheet Capacity*
Speed
Amperage
Noise Level
Duty Cycle
Volts/ Hz
Power Consumption (input/output)
Bin Capacity
Safety Lock
Staples/ PaperClips
Credit Cards
* Meassured using standard 20# paper. Shredding other than standard paper may damage or shorten the lifetime of the shredder knives.

Important safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC.
IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT
SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS INSTRUCTION MANUAL AND ON THE
PRODUCT. THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, AS
WELL AS CAUSE PRODUCT OR PROPERTY DAMAGE. DO NOT
CONNECT HIS UNIT TO ELECTRICAL POWER OR ATTEMPT TO
OPERATE IT BEFORE YOU HAVE READ THESE OPERATING
INSTRUCTIONS. SAVE THESE INSTRUCTIONS FOR LATER USE.
THIS WARNING IS FOUND ON THE PRODUCT.
This safety message means that you could be seriously hurt or killed if you
open the Product and expose yourself to hazardous voltage.
THIS WARNING IS FOUND ON THE CROSS-CUT VERSION ONLY.
This safety message means that you could be seriously hurt if you place your
hands in the discharge area.
4
®
SC170/CC175/SC180/CC185
SC170
Straight-Cut
8.75" / 222mm
1/4" / 6mm
12
10fpm / 3mpm
tbc
tbc
tbc
5.5g / 23L
Yes
Yes
Yes
ATTENTION
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
WARNING
Sharp blades above.
Keep hands away from
discharge chute. Do not
attempt to defeat safety
interlock switch.
CC175 SC180
Cross-Cut Straight Cut
8.75" / 222mm 9" / 230mm
5/32" x 1-9/16" / 4 x 40mm 1/4" / 6mm
8 15
10fpm / 3mpm 10fpm / 3mpm
tbc tbc
tbc tbc
tbc tbc
5.5g / 23L 6.5g / 25L
Yes Yes
Yes Yes
Yes Yes
Control Panel
Safety Lock
Switch ON/REVERSE/FORWARD/AUTO/OFF
Waste Bin
Window. Indicates when basket is full
Easy lift handle (SC170/CC175 only)
Electrical safeguards
• Unplug your shredder before moving it, emptying the shred bag, or when it is
not in use for an extended period of time.
• Do not operate with a damaged power supply cord or plug, after it
malfunctions, or after it has been damaged in any manner.
• Do not overload electrical outlets beyond capacity as this can result in fire or
electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily
accessible.
• Do not alter the attachment plug. The plug is configured for the appropriate
electrical supply.
• Do not use near water.
• Keep out of reach of children.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
WARNING
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Foreign substances can be explosive
CC185
Cross-Cut
9" / 230mm
5/32" x 1-3/8" / 4 x 35mm
10
10fpm / 3mpm
tbc
tbc
tbc
6.5g / 25L
Yes
Yes
Yes