Directions For Use - Procheck TH FR1DB1 Manual De Instrucciones

6. Directions for Use

1. Press the «O/I» button. The LCD is
activated to show all segments for
2 seconds.
2. The last measurement reading will be
shown on the display automatically for
3 seconds with the «M» icon.
3. When the °C or °F icon is flashing, a beep
sound is heard and the thermometer is
ready for measurement.
4. Place the probe gently onto the area
approximately 1cm above the center of
the eyebrow. If the eyebrow area is
covered with hair, sweat or dirt, please
remove the obstacle beforehand to
improve the reading accuracy.
5. Press the «START» button once and release
it. Start to move the instrument steadily
from 1cm above the center of the eyebrow
to 1cm above the tail of the eyebrow area.
A long beep sound will emit after 3 seconds to
acknowledge the completion of measurement. If the probe
movement is too slow to reach the tail of the eyebrow
before the long beeb sound heard, repeat the measurement
as above from point 4, but simply move the probe a little
quicker this time.
6. Read the recorded temperature from the
LCD display.
IMPORTANT:
• Patients should stay in steady - state room condition for at
least 30 minutes.
• Don't take a measurement while or immediately after
nursing a baby.
• Don't use the forehead thermometer in high humidity
environments.
• Patients should not drink, eat, or exercise before/while
taking the measurement.
6