Energy Saving Tips - Koenic KFK 45411 A2 NF Manual De Instrucciones

English
Mounting the door
Caution
After you have placed the refrigerator
upright on its feet, wait for 2 hours before
you connect it to the mains to permit the
cooling system to regain full capacity.
Place the freezer door on the lower hinge.
1
Turn the middle hinge and insert the bolt
into the left hole of the freezer door and
screw the hinge firmly. The freezer door is
now fixed. Check for correct function and
fitting.
Unscrew the bolt from the top hinge. Turn
2
the hinge, insert and screw in the bolt from
the other side again through the hole.
Clip the additional cover (provided) into the
3
top hinge.
Place the hole provided on the left side of
4
the refrigerator door onto the bolt of the
middle hinge and hold the door firmly. Insert
the top hinge bolt into the left hole provided
on the top of the refrigerator door. Screw
the upper hinge to the refrigerator. Check
for correct function and fitting. Clip on the
matching front caps to the hinges.
Clip on the top cover to the refrigerator door.
5
If necessary, handles can be attached to the
6
refrigerator and freezer door.
Remove the protective caps.
Fix the handles, with the extra screws
provided, to the sides of the refrigerator and
freezer door. Insert the extra protective caps
provided on the screw heads.
18
KFK45411-A2-NF_170728_V05_HR.indb 18

Energy saving tips

• Do not place the product in the vicinity of a
heat source (radiator or kitchen stove, etc.).
• Ensure unobstructed air flow around the
refrigerator and freezer.
• If an ice layer has built, defrost the unit. A
thick ice layer affects the transmission of the
cold, thus the energy consumption will be
increased.
• When opening and taking out food, only
open the door shortly. A shorter door
opening time causes less ice to deposit on
the freezer walls.
• Select the temperature regulator setting
according to the of filling amount of the
product.
• Use drawers, baskets or shelves to store the
food. If the energy of the product is used
efficiently, the energy consumption can be
minimized.
28/7/17 4:33 pm