Overview Of Suction Nozzles - Easy Home VC 2016 Manual Del Usuario

USA
Operation
1. Make sure that the vacuum cleaner is sufficiently charged
(see chapter "Charging the vacuum cleaner").
2. Take the vacuum cleaner out of the wall bracket.
3. Check whether the dust filter
in the chapter "Cleaning".
4. Check whether the filter housing with the coarse dirt filter
bin 18 have been correctly inserted as described in the chapter "Cleaning".
5. If desired, fit the crevice nozzle
lip in the receptacle for the suction nozzles
14
dirt nozzle 13
suction nozzles").
6. To switch the vacuum cleaner on, move the On/Off switch
(see fig. A) and push it forward while vacuuming.
The vacuum cleaner will start vacuuming.
7. Let go of the On/Off switch to switch the vacuum cleaner off.
The On/Off switch will jump to the "0" position. The vacuum cleaner will switch
off.
After vacuuming up liquids, hold the vacuum cleaner so that
the suction opening is facing down. This will prevent the liquid
from infiltrating the motor housing.

Overview of suction nozzles

Suction nozzle
Crevice nozzle
Fine dirt nozzle
16
hup-service@h-u-p.com
20
on the crevice nozzle (see fig. E and chapter "Overview of
has been correctly inserted as described
11 or the suction nozzle with the rubber
17
Use
• Used as an adapter for the fine
dirt nozzle.
• Used for cleaning crevices and
dry vacuuming.
• Is fitted on the crevice nozzle.
• Used for removing dust in
areas where there are objects
that are not to be vacuumed
up (e.g. drawers). The dirt is
loosened by the bristles and it
is sucked up through the tube
ends. Larger objects are not
vacuumed up.
19 and the dust
. You can also fit the fine
3 forward
AFTER SALES SUPPORT
1-800-886-8506
USA