Easy Home VC 2016 Manual Del Usuario página 18

USA
Cleaning
NOTICE!
Risk of damage!
If the dust bin is too full or the amount of liquid has exceeded
the MAX mark, dust or liquid could penetrate the motor housing
and damage the vacuum cleaner.
− When vacuuming up liquids, the dust bin must be emptied
no later than once the "MAX" mark has been reached.
NOTICE!
Risk of damage!
Improperly cleaning the vacuum cleaner can cause damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, hard scrapers and the like. They could damage the
surfaces.
− Do not in any case put the vacuum cleaner in the
dishwasher. It would be destroyed as a result.
1. Switch the vacuum cleaner off and pull the mains adapter out of the socket.
Take the vacuum cleaner out of the wall bracket or, if necessary, pull the
charging plug
(see fig. A).
2. Let the vacuum cleaner cool off completely.
3. Brush the vents
4. Use a damp cloth to wipe off the motor housing.
5. Rub the motor housing until it is completely dry.
6. Push and hold the locking button on the dust bin
off of the motor housing (see fig. D).
18
7. Pull the dust filter
coarse dirt filter
8. Carefully pull the filter housing with the coarse dirt filter out of the dust bin.
At the same time, make sure that neither dust nor liquids leak out of the
dust bin.
9. Empty the dust bin.
18
hup-service@h-u-p.com
out of the charging slot of the vacuum cleaner
15
5 on the motor housing
20 out of the filter housing with the
(see fig. F).
19
4 off with a soft brush.
1 and pull the dust bin
AFTER SALES SUPPORT
USA
1-800-886-8506