Specifications; General; Dimensional Drawing - Tascam VL-S3BT Manual Del Usuario

Specifications

General

8 Maximum effective output (distortion: 10%)
14W + 14W
8 Speaker units
3-inch (76.2mm) woofer
0.5-inch (12.7mm) tweeter
8 Enclosure
Bass reflex type
8 Frequency response
80 Hz–22 kHz
8 Crossover frequency
8 kHz
8 Sensitivity
−4.8 dBV (580 mV) 14 W+14 W
8 External input jacks
RCA pin jacks, stereo mini jack
8 Input impedance
50 kΩ
8 Bluetooth
Bluetooth version: 4.0
Output class: Class 2(Unobstructed communi-
cation distance: about 10 m*)
Supported profile: A2DP
Supported A2DP codecs: SBC, AAC and Qualcom-
m®aptX ™ audio
Supported A2DP content protection: SCMS-T
*This communication distance is an estimate. The
communication distance might differ depending
on the surrounding environment and wave
conditions.
8 Power
AC adapter (PS-P1524E)
Input voltage: AC 100–240V (50/60 Hz)
Output voltage: DC 15 V
Output current: 2.4 A
8 Power consumption
6.5 W
8 Dimensions
110 × 170 × 138 mm (width × height × depth,
excluding protrusions)
8 Weight
Active unit: 1.1 kg
Passive unit: 1.0 kg
12
TASCAM VL-S3BT

Dimensional drawing

110mm
• Illustrations in this manual might differ in part
from the actual product.
• Specifications and external appearance might
be changed without notification to improve the
product.
138mm