Instructions
Attaching to Camera and Turning on
1. Connect the Phottix accessory cable to the
Plato Receiver cable port.
2. Connect the other end to the camera
shutter port.
3. Turn on the camera.
4. Press and hold the Power Button on
Transmitter and Receiver for 3 seconds to
turn it on and off (Power will automatically
turn off after one hour of inactivity).
Confirm Range in Shooting
Half press the Transmitter shutter button. If
4
the LED indicator 1 and 2 on Transmitter turn
green, you are in range of taking photos. If
the LED indicator 2 turns red, you are out of
range and you cannot take photos.
Shooting Modes
The Plato has Single/2 seconds delay/
Continuous and Bulb shooting modes.
Press the SET button to cycle between each
shooting mode.
Single Shooting Mode
1. Set the Plato Transmitter to the S position.
2. Half-pressing the Transmitter shutter
button will focus. The LED indicator 1 and 2