AudioSonic cd-571 Manual De Instrucciones página 7

STEREO HEADPHONE JACK
• Plug stereo headphones (not included), equipped with a 3.5mm mini-plug, into
the PHONES jack (on top of the unit, left-hand side) for private listening, without
disturbing those around you.
• Reduce the VOLUME to a low level before putting on the headphones. You can
then adjust the VOLUME progressively to a comfortable level.
CD/MP3/USB PLAYER OPERATION
CD/MP3 FILE PLAYBA CK
The CD player supports audio discs, CD-R, CD-RW, MP3 and USB files. Do not attempt
to read CD-ROM, CDi, VCDs, DVDs or data CDs.
Note: Even if this portable radio-CD player is able to read CD-R and CD-RW discs, in
addition to conventional compact discs, it is not possible to offer a 100% guarantee
that all CD-R/RW discs can be read, playback depends on the quality and condition
of the blank discs that you use, among other things. A play back failure does not
necessarily indicate that the unit is malfunctioning.
1. Position the FUNCTION SELECTOR on CD/MP3/USB (the display unit briefly
displays - - -).
2. To open the CD player door, raise it by the corner marked OPEN/CLOSE.
3. Insert a CD, CD-R, CD-RW or MP3 disc, printed surface facing upwards and gently
press the CD player door to close it.
4. Start playback by pressing PLAY/PAUSE.
• Press PLAY/PA USE for 2 seconds to switch from CD/MP3 to USB mode. Press PLAY/
PAUSE again for 2seconds to return to CD/MP3 mode.
5. Press PLAY/PA USE to interrupt or resume playback.
6. To stop CD playback, press STOP.
NOTE: CD playback stops automatically when:
• the CD compartment is opened;
• the radio function is selected;
• the CD/MP3/USB is finished.
SELECTING A DIFFERENT TRACK
During playback, press NExT or BACK on the unit or remote control unit to select a track.
• If you have selected a track number in Stop or Pause mode, press PLAY/PAUSE to
resume playback.
• Briefly press NExT to pass to the next track or press NExT several times until the
desired track number appears in the display.
• Briefly press BACK to return tot he start of the current track.
• Press BA CK several times to find a previous track.
SELECTING A DIFFERENT FOLDER
• Press FOLDER UP for 2 seconds. When the display unit flashes, press NExT or BACK
to select the desired folder.
• To select the previous files, press FOLDER DOWN.
(Comment: the FOLDER UP/DOWN function can only be activated if the disc contains
at least 2 files)
SEARCHING FOR A PASSAGE ON A TRACK
1. Press and hold BACK or NExT to read the track in fast forward mode at reduced
volume.
2. When you have found the desired passage, release the BACK or NExT
button(normal playback resumes automatically).
MODE
Repeat: play back of the current track continuously.
Repeat all: play back of the entire CD continuously.
Album: playback of selected folder continuously.
Random: playback in random order continuously.
PROGRAMMING OF TRACK NUMBERS
Up to 20 tracks can be programmed in any order. If desired, a given track can be
programmed more than once.
1. In STOP mode, press BACK or NExT to select a track.
2. When the desired track number appears press the PROg button once to record the
track (the display unit displays "prog", briefly followed by the track number selected).
3. Repeat steps 1 and 2 to select and program the desired tracks.
4. To start playback of your programmed tracks, press PLAY/PAUSE.
EN
Instruction Manual
7