POLTI VAPORELLA SUPER PRO Manual De Instrucciones página 24

If the cap is in good condition, screw it back on completely. If
steam continues to escape from the cap, take the appliance
to the nearest authorised service centre.
• Periodically check the condition of the safety cap and seal.
Impact and being dropped may compromise the safety of the
cap. Replace with an original spare part or replace the seal.
• If the cap spins freely, this indicates that the boiler is still pres-
surised and therefore hot. Never force the cap open, whether
the appliance is switched on or the boiler is switched off and
the appliance is disconnected from the mains. Always wait for
the boiler to cool, opening the cap without force.
• Do not use tools to unscrew the cap. If the cap cannot be re-
moved, even once the appliance has cooled, go to your nea-
rest authorised service centre.
• WARNING
has been opened when the boiler is still hot, even if the ap-
pliance is unplugged from the mains. On contact with the hot,
empty boiler, cold water will evaporate producing a spray of
steam which can cause burns. Only fill the boiler when cold
and always keep your face away from the boiler mouth when
filling.
• The use of non-original Polti caps and disregard for the in-
structions in this manual constitutes improper use.
S.p.A. declines all liability for any accident deriving from any
improper use of this appliance.
Never fill the boiler as soon as the safety cap
| | 2 2 3 3 | |
Polti