Positioning the radio
transmitter
Bear in mind the following points
when positioning the radio transmit-
ter, in order to achieve the greatest
possible range from the radio trans-
mitter:
- The radio transmitter should not
be set up close to devices which
emit powerful interference sig-
nals, such as TVs, computer moni-
tors or mobile phones.
- The radio transmitter should
not be placed on metallic
objects, since otherwise the
radio range will be restricted
by metallic shielding.
- Position the radio transmitter
as close to the centre of the
building as possible, at a
medium height in the room.
Maintenance and care
The Infrared movement transmitter
does not require any maintenance.
If the unit does become dirty, simply
wipe it clean with a soft, damp
cloth. Never use spirits, thinners or
other organic solvents. Do not set up
the Infrared movement transmitter
where it will be exposed to full sun-
light for long periods. In addition, it
must be protected against excessive
heat, moisture and severe mechani-
cal shocks.
12 English
Note: This product is not protected
against splash water. Do not place
any containers filled with water,
such as flower vases, or anything
with an open flame, such as a lit
candle, on or near the product.
Warranty
The Infrared movement transmitter
is a very reliable product. Should a
malfunction occur despite the unit
having been set up and operated
correctly, please contact your dealer
or the manufacturer directly.
This warranty covers the repair of
the product and returning it to you
free of charge. It is essential that
you send in the product in its origi-
nal packaging, so do not throw the
packaging away.
The warranty does not apply to
damage caused by incorrect hand-
ling or attempts to repair the unit by
people not authorised to do so
(destruction of the seal on the unit).
Repairs will only be carried out
under warranty if the completed
warranty card is returned accompa-
nied by a copy of the dealer's invoi-
ce/till receipt.
Always specify the product num-
ber in any event.