Self Clean - Samsung WA48H7400A Serie Manual Del Usuario

self cleAn

Self Clean is a self-cleaning cycle that removes mold that may
occur inside the washing machine.
1. Press the power button.
2. Select the self clean cycle.
• Once the self clean cycle is selected, the only
function that can be set is Delay End.
3. Press the start/pause button.
• If you press the start/pause button, Self Clean
begins.
• Using Self Clean, you can clean the drum without using a
cleansing agent.
cAution
• Never use Self Clean when laundry is in the washing
machine. This may cause damage to the laundry or a
problem with the washing machine.
the self clean Auto indicator function
• If the "self clean" indicator is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Self Clean.
• If you do not run Self Clean, the "self clean" indicator
turns off. However, the "self clean" indicator will light
again after two washes. Not running Self Clean at this point
will not cause a problem with the washing machine.
• Although the Self Clean Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
WA48H7400A*
WA45H7200A*
WA45H7000A*
English - 29
WA48H7400A*/WA45H7200A*
WA45H7000A*