Start To Use - ideus TR30 Manual Del Usuario

4. Start to Use

Step 1：Charge the battery in first use
Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Bluetooth
indicator
Power switch
GPS indicator
Step 2：Power on, connect with Bluetooth
Bluetooth indicator
Power ON/OFF switch
Note: Some PDA needs to restart the Bluetooth function if you need to re-connect.
Step 3：GPS function test
In firstly Use of this Receiver,we strongly recommend to bring your Bluetooth GPS Receiver
outdoor and open sky at least 10~15 minutes for almanac update.
GPS Acquisition
Connect charge cable to the power plug at the
bottom and start charging
Power Indicator：
(1)Green LED blinking
Power low/charging (see below detail described)
(2) Green LED stop to blink &light up
Charge completed (LED will vanish when cable away)
Push the power switch 1~2 seconds to Power
on
Bluetooth indicator：
(3) Bluetooth host searching：
3 pulses per second
(4) Bluetooth host connected：
1 pulse per second
Power on the TR30 Bluetooth
GPS Receiver
GPS Acquisition Fix Indicator
(1) Red LED lights up continuously
：Inquiring
-51-