Product Information; Machine Identification; Technical Data - Mafell HB 2 E Manual De Instrucciones Original Y Lista De Piezas De Recambio

You will find the following warnings and symbols in these operating instructions:
This symbol indicates where you will find notes for your safety. If disregarded, this may result in
very serious injuries.
This symbol indicates a potentially hazardous situation. If disregarded, the product or objects in
its vicinity may be damaged.
This symbol indicates tips for the user and other useful information.
1

Product information

for machines with product no. 917301, 917320, 917321 or 917325
1.1 Manufacturer´s data
MAFELL AG Postfach 1180, D-78720
Oberndorf/Neckar Phone +49 7423 812-0, Fax +59 7423 812-218
1.2

Machine identification

All data required for identification of the machine are stated on the rating plate which is attached to the motor
casing.
Protection class II
CE-mark to declare conformity with the essential health and safety requirements according to
Annex I of the Machinery Directive
Only for EU countries
Do not dispose of electric tools together with household waste material!
In accordance with the European directive 2002/96/EC on waste electrical and electronic
equipment and transposition into national law, obsolete eletrical tools must be collected sepa-
rately and recycled in an environmentally-compatible manner.
1.3

Technical data

Drilling in wood
Drilling in steel
Screwing in wood
Screwing in sheet
Idling speed 1st gear
Idling speed 2nd gear
Load speed 1st gear
Load speed 2nd gear
Collar diameter
Chuck width
-11-
English
∅
max. 60 mm (2 3/8 in.)
∅
max. 16 mm (5/8 in.)
∅
max. 10 mm (25/64 in.)
∅
max. 8 mm (5/16 in.)
150 – 950 min
-1
300 – 2250 min
-1
900 min
-1
2100 min
-1
43 mm (1 11/16 in.)
13 mm (1/2 in.)