Amplicomms RingFlash 250 Manual De Instrucciones página 29

Setting the ring melody
There are 3 melodies available for
selection on the RingFlash 250 base
station. Simply move the sliding
switch (8) on the left-hand side to
select melody 1, 2 or 3.
Setting the doorbell melody
There are two melodies available
for selection by moving the sliding
switch (9) on the left-hand side to
select melody 1 or 2.
Setting the alarm mode
There are 4 alarm modes available for
selection. Use the sliding switch (15)
on the right-hand side to select one of
the following alarm modes.
Quick function overview
Mode Telephone
0 Off
Melody from
loudspeaker and
Melody from
loudspeaker and
external vibra-
tion
Melody from
loudspeaker,
and external
vibration
Suppressing the ringing tone
Press the STOP button (7) to sup-
press the ringing tone for incoming
calls.
Doorbell
Melody from
loudspeaker
Melody from
loudspeaker
light
Melody from
loudspeaker
and external
vibration
Melody from
loudspeaker,
and external
vibration
29