Bag Changing - Sears Kenmore 116.20212 Manual Del Proprietário

The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries [ f(,,....---_..___
the dirt to the dust bag through the air- j_, _"--_._
flow passages° The dust bag lets the
air pass through, while it traps the ,_/_
dirto ,.ZT_//
For best cleaning results, keep ,z_.Y /
the airflow passage open. _y IJ
Check the starred areas _:t_"
occasionally for clogs, _}7
Unplug from outlet ,,_/'_
before
checking,
Motor
Safety
Filter Exhaust
BAG CHANGING
7. The red bag mount will flip forward after
For best cleaning results, the dust bag
should be changed often., The performance
indicator (some models) will specify when
the dust bag needs to be changed or the
airflow is blocked, NOTE: See PARTS AND
FEATURES for Bag #,
1. Unplug cord from
wall outlet.
2. Remove hose
from canister.
3. Pull hood release
out and up, then lift
canister hood.
4. Disengage
cardboard tab from
red bag mount away
and lifting up,
5. Pul bag out of
the red bag mount.
F,ter,. / // I / /l//
6. Check and
replace, if
necessary, the
motor safety
filter.
removing bag.
8, Rotate red bag
mount down and
install bag into
slots per
illustrations
pushing down until
the cardboard tab
locks into position
and the holes
align. Tuck the bag
securely into the bag cavity so that none of it
is able to be pinched by the hood.
9. Replace and latch canister hood.
10, Insert hose into canister°
11. Plug cord into wall outleL
I
• CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet fresh-
ener, face powder, fine dust, plaster,
soot, new carpet lint, etc. can clog
the bag and cause it to burst before
it is full= Change bag more often
when vacuuming these materials.
12