Unpacking The Appliance; Cleaning & Maintenance - Profi Care PC-LR 3075 Manual De Instrucciones

Unpacking the Appliance

1. Take the appliance out of its packaging.
2. Remove all the packaging material such as plastic foil,
filling material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the box.
4. In case of incomplete delivery or damage, do not operate
the appliance. Return it to your dealer immediately.
Overview of the Components /
Scope of Delivery
1 Air outlet
2 Indicator lamp (Power level "Sleep mode")
3 Indicator lamp 2 (Power level "Medium")
4 Indicator lamp 3 (Power level "High")
5 button (Power level selection)
6 Power indicator light
7 button (on / off)
8 Motor housing
9 Air intake
10 Filter element
11 Cover / closure
12 Illuminated LED ring (in levels 2 and 3)
Notes for Use
Location
A skid-proof, even surface is suitable as installation location.
The appliance operates more effectively, if you keep the
windows and doors closed during operation.
WARNING:
• Always pull the plug before cleaning and maintenance.
• Never immerse the motor housing in water for cleaning. It could
result in an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
• Clean the motor housing with a dry cloth, without
additives.
You can moisten the cloth slightly to wipe away extreme
soiling.
PC-LR3075_IM
Filter Element
Your appliance features a twin filter system consisting of the
following filter stages:
• Pre-filter – retains coarse particles
• HEPA filter – retains fine dust particles, pollen etc.
For more information about the filter element, see "Clean-
ing / Maintenance".
Electrical Connection
Insert the plug in a duly installed protective contact socket.
You will hear a beep sound and all indicator lamps light up
briefly. The appliance will then enter standby mode.
Operating Buttons
The buttons on the appliance are sensor touch buttons. In
order to perform the corresponding function gently touch the
buttons. Whenever a button is pressed, it will be confirmed
by a beep sound.
Switching the Appliance On / Off
• Press the
• Press the
Power Level Selection
Press the
available power levels. The corresponding indicator light
indicates the selected power level.
In power levels 2 and 3 the LED ring in the bottom part of
the appliance lights up.
Cleaning / Maintenance
Cleaning the Filter Element
If required, you may clean the filter element by beating it
slightly or wiping it gently with a soft brush or a damp cloth.
Do not immerse the filter element in water!
To remove and install the filter element proceed as
described in the following section "Replacing the Filter
Element".
Operation
button to switch on the appliance. The
appliance always starts operating in level 2.
button again to switch off the appliance.
button repeatedly to choose between the
NOTE:
CAUTION:
27
03.09.19