external switching device, such as a timer or connected to a
power circuit, which is being regularly turned on and off by the
electrical grid operator.
Make sure that the temperature control setting is on «i» and
that the device has been disconnected from mains before you
try to clean it or deactivate it.
Never leave the device turned on while it is not being monitored.
Appliance is not to be operated in the open position.
Use extreme caution when moving an appliance containing hot
oil or other hot liquids.
For usa anD canaDa MarKEt onlY if children or individuals
who are not familiar with the unit should use the device, con-
stant supervision is mandatory.
Mains plug this device has a polarized plug (one of the con-
tact pins is wider than the other). in order to reduce the risk
of electrical shock, the plug can be connected with mains only
by fitting the plug correctly into the outlet. if the plug does not
fit into your receptable, turn it 180° and try again. if it should
still not fit, contact a certified electrician. Do not attempt to
replace the plug yourself.
retain these user instructions
for future reference.
sEtting up
thE appliancE
Always place the device on a stable, level surface that is
neither hot nor anywhere near a heat source. the set-up
surface must be dry. Keep the device and its power cord
out of children's reach.
7