Technical Specifications; Safety Notes - brennenstuhl SL DN 2405 IP44 Manual De Instrucciones

Operating Instructions
D
SMD-LED-Light with Tripod
Please note: Please read these instructions carefully prior to mounting the light and store them in
a safe location afterwards!

TEcHNIcaL SPEcIfIcaTIONS

Model:
Protection class:
Type of protection:
Nominal voltage:
Cable:
Protective cover dimensions:
Type designation:
SL DN 2405 IP44
SL DN 2405 DUO IP44
The LED light is suitable for indoor and outdoor lighting applications. The LED light with tripod is
wired ready for connection and comes with a connecting cable and a safety plug.
This lamp is only suitable for normal use It is NOT allowed to be used for operation in harsh
environments such as construction sites.

SafETy NOTES

1. Do not use this light without properly attached gaskets!
2. LED lights are extremely bright! Avoid looking straight into an LED light beam, as doing so
could result in irreversible eye damage.
3. Damaged protective covers must be replaced with an original Brennenstuhl protective cover
before the light can be used again.
4. Make sure the connection cable never comes close to sharp edges or other damaging factors,
such as chemicals or solvents.
5. If the mains supply cable of the light is damaged it must be replaced by a qualified technician
in order to avoid risks.
6. Make sure the tripod is securely placed and stable. Make sure the cable is not crimped or
otherwise damaged.
BA_SMD-LED-Leuchte mit Stativ_0489072-16P024_160929.indd 5
SL DN 2405 IP44, SL DN 2405 DUO IP44
I
IP44
220 – 240 V~ 50 Hz
2 m H05RN-F3G1.0
180 x 143 x 4 mm
Nominal Weight:
output:
24 LED x 0.5 W 2.4 kg
2 x 24 LED x 0.5 W 4.4 kg
Dimensions: Maximum
projected
area:
940 x 940 x 1538 mm 250 cm
940 x 940 x 1560 mm 2 x 250 cm
Maximum
tripod
height:
1.30 m
2
1.20 m
2
5
29.09.16 12:21