Vonyx STM-2250 Manual De Instrucciones página 4

4 CHANNEL DJ MIXER
The mixer combines and routes signals of different sound sources
Separated tone control for each channel
Input and output RCA terminals ; headphone and mic with 6.3mm jack connectors
The mixer has a cue function and a crossfader
Integrated MP3 player with USB/SD card slot
With 8 digital sound effects and real speed and volume control for effects
Ideal for rumpus room and hobby DJs.
1. CROSS-FADER: Slide for step less cross-fading from one to another assigned channel.
2. SOUND EFFECTS SECTION
Eight different sound effects ( ALIEN, APPLAUSE, SIREN, CROAK, GLASS， SCREAM， CROWD & BIRD) may be
added to your mixer by pressing the SOUND EFFECTS CONTROL BUTTONS. The volume of the effects can be
adjusted using the rotary VOLUME located the right side under the BIRD effects buttons. The pitch of the effects can
be increased or decreased using the rotary SPEED CONTROL located under the ALLIEN effect button.
3. CHANNEL VOLUME FADER
Channel fader will allow you to adjust the volume for that particular Channel selected
4. CHANNEL EQ-HIGH
The rotary knobs allow you to adjust the High frequency of the channel input
5. CHANNEL EQ-LOW
The rotary knobs allow you to adjust the Low frequency of the channel input
6. CHANNEL CUE SELECTOR SWITCH
The button allows you to choose which channel you wish to monitor in your headphones by pressing the buttons down.
7. MASTER VOLUME FADER
This fader will allow you to adjust the master volume of the unit
8. LINE1/USB INPUT SELECTOR
9. PHONO1/LINE 2 INPUT SELECTOR
10. OUTPUT METER: VU-meter with LED as indicators for the strength of the output signal.
11. MIC VOLUME: Volume control of the microphone
12. CUE VOLUME-The CUE VOLUME ROTARY KNOB adjusts your headphone monitor output volume.
13. MODE SELECTOR- To allow you to select the input source
14. MP3 Player: Selects the previous track or volume decreasing
15. MP3 Player: Starts the playback and pause function
16. MP3 PLAYER: Selects the next track or volume increasing
17. USB INPUT
Insert your USB flash drive into this slot. The unit will only read .mp3 file formats from the USB flash drive.
18. SD Card INPUT
Insert your SD CARD flash drive into this slot. The unit will only read .mp3 file formats from the flash drive
19. IR- For remote control ( Optional)
20. AC12V: Connector for a power supply.
21. Microphone input connector: To insert your microphone
4 - 16