Thank you for using our controller. For your safety, please read the User Manual carefully before operation.
It includes important installation, operation and safety instructions. Please install and operate as requested
in the Manual. Please keep the manual with the controller for any unexpected requirement.
Power the unit off when opening the controller or before repair.
We will not take any responsibility to the controller damage, property loss or body injure which is caused
by the incorrect installation, operation and maintenance.
Packing Content
DMX controller
•
•
Power supply
•
User manual
Installation
First, put the controller on the desk. Connect the supplied mains adaptor to the DC12V input on the side
panel of the unit.
Connect the unit to a line containing DMX512 compatible light projectors. Plug in the supplied mains
adaptor.
Operation
•
Switch the unit ON via the POWER
button on the side panel of the unit.
•
The controller will make a self-test.
The POWER indicator lights up.
•
•
The DMX indicator will flash.
•
In the initial status, the controller is
set on PAGE 1 (CH1-CH6) and the
PAGE indicator lights up in RED.
•
If you want to control channels 7-12,
press the PAGE button until the PAGE
indicator lights up in BLUE.
•
The Master faders control the total
DMX output values of all channels.
Value 0 means that all DMX outputs are closed.
Maintenance
Please make sure the controller is powered off before cleaning or maintaining. Wipe the controller with a
soft, dry cloth. Don't use alcohol or detergents to clean the housing.
Do not open the housing!
Specifications
Power supply ...................... 12Vdc 0.5A via supplied 100-240Vac 50/60Hz mains adaptor
Consumption ..................................................................................................0.7 W / 59 mA
Number of channels ........................................................................................................ 12
Number of channels per page ............................................................................................. 6
Standard control ..................................................................................................... DMX512
Operating temperature ................................................................................... -10°C to 50°C
Dimensions LxWxH ................................................................................. 180 x 100 x 35mm
Weight ...................................................................................................................... 0.592kg
© Copyright Lotronic 2017
GB
2