Data Input Format - Sartorius YADAP-RS Instrucciones De Funcionamiento

Data Input Format

You can connect a computer to your balance/scale to send commands via the balance/scale
interface port to control balance/scale functions and applications. A control command
can have up to 6 characters. Each character must be transmitted according to the settings
configured in the operating menu for data transmission.
Format for Control Commands
Format 1 (upper-case letter):
Format 2 (lower-case letter):
Esc: Escape (optional)
!: Command character
_: Underline
Command character
!
K
L
M
N
O
P
R
S
T
W
Command character
!#
f0
f1
f2
Examples:
Esc P or P CR LF
Esc f0_ or f0_ CR LF
Esc
Esc
CR: Carriage return (optional)
LF: Line feed (optional)
Format 1:
Meaning
Weighing mode 1 (very stable conditions)
Weighing mode 2 (stable conditions)
Weighing mode 3 (unstable conditions)
Weighing mode 4 (very unstable conditions)
Block keys
Print (print, start autoprint, stop printing)
Unblock keys
Restart/self-test
Tare and zero (combined)
Calibration/adjustment: function depends on menu setting
Format 2:
Meaning
Function key (F)
Function key (Enter)
Function: Enter key > 2 sec
! CR LF
! # _ CR LF
11