Koenic KIP 2432 Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Cookware
Suitable cookware:
Fig.
1
Only use pans and pots which are
declared as suitable for induction
cooking with a bottom diameter of
12 to 26 cm.
Not suitable cookware:
• Heat-resistant glass, ceramic, copper
or aluminium cookware
• Cookware with curved bottoms or
with feet
• Cookware with a diameter less than
12 cm and larger than 26 cm.
Operation
Place the induction cooking plate on
Fig.
2
an even, stable and heat resistant
surface. Ensure for enough spaces for
air circulation. The following distances
are required: 60 cm above and 10 cm to
all sides.
Connect the power plug to a suitable
Fig.
3
power outlet. An acoustic signal sounds
and the power indicator lights flash
once. The induction cooking plate is on
standby mode now.
Note: If the cooking surface temperature is
> 50 °C H is shown in display.
Place a filled, suitable cookware in the
Fig.
4
center of the circle mark on the hob.
Warning
The pots which are placed on the two hobs
shall not weight more than 10 kg in total
(incl. contents).
Note: Ensure that the pot/saucepan is clean
and dry on the outside.
IM_KIP2432_180613_V04_HR.indb 15
The hobs can be used separately or at
Fig.
5
once. The use is explained based on
one hob. The left hob has 2000 W, the
right hob has 1500 W.
Press the ON/Standby button for
Fig.
6
approx. 2 seconds to switch on a
certain hob which is indicated by an
acoustic signal and a red indicator LED.
Choose temperature or power mode
Fig.
7
using buttons
mode is indicated by a red LED.
Set the desired power and temperature.
Fig.
8
Temperature:
• 60-220 °C (in 20°C steps)
Power:
• 1500 W plate: 200-1500 W
(in 200 W steps, the last step is 100 W)
• 2000 W plate: 200-2000 W
(in 200 W steps)
In turned on product will switch to
Fig.
9
standby mode,
• after 60 seconds, when no setting
was done
• after 60 seconds, when the hob is
left empty
After use press ON/Standby button to
Fig.
10
turn the product to standby.
Warning
Always unplug the product to ensure it is
completely turned off.
English
and
. The preset
15
13/6/18 4:26 pm

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido