Gemini MDJ-1000 Manual De Instrucciones página 8

Once you have connected all your cables, you can turn the
MDJ-1000's POWER on by pressing the POWER (1) button,
pressing the button a second time will turn off the unit.
s o u r c e s e l e c t
The SOURCE SELECT (17) allows you to choose the media
from which you will play music:
CD Pressing the CD source button allows you to play
music from the CD drives.
USB
Pressing the USB source button allows you to play
music from a USB device. (Default selection)
MIDI Pressing the MIDI source button switches the unit
to MIDI mode with bi-directorial support. In this mode,
all controls (button pressings, pitch potentiometers
moving and wheel rotations) are registered on the unit
and transferred to PC via USB MIDI. This can be used in
conjunction with DJ software to contrhol the software's
parameters.
LINK
Pressing the LINK source button allows you to play
music from a linked MDJ-1000.
l o a d i n g / e J e c t i n g
d i s c s
The SLOT-IN CD-ROM (pictured below) is where the CD
is held during loading, unloading and playback, and holds
both 12 cm and 8cm CD's.
Pressing the EJECT (19) button will eject the disc from the
SLOT-IN CDROM. The disc will not eject in PLAY mode.
8
l o a d i n g d i s c s a n d m e m o r y d e v i c e s
l o a d i n g / e J e c t i n g
u s b / s d d e v i c e s
USB Insert the USB memory device into the USB input (E)
on the top of the MDJ-1000. Upon loading the device, the
LCD display will show the folders and tracks on the USB
memory device.
E
To eject the USB, change the SOURCE SELECT (17) to
another selection and remove the USB memory device.
*NOTE: Before powering off the MDJ-1000, remove any
USB memory device.
b r o w s i n g t r a c K s /
f o l d e r s
Turning the browse encoder (14) activates the browse
screen. The browsing display shows the playable files and
folders on the CD, USB memory device, or LINKed device.
Rotating the browse encoder (14) allows searching
through the browser.
To open a folder, highlight a folder and press in the encod-
er (14) to select. To load a track, highlight a track to load
and press the encoder (14) again.
To return to the previous folder, press the back (15) button.
Once you have loaded a track, the TRACK TITLE on the
LCD Screen will display the loaded track.
-
m d j
M D J - 1 0 0 0
P R O F E S S I O N A L M E D I A
1 0 0 0 m a n u a l • g e m i n s o u n d
.
c o m