Garmin Force 50 Manual De Instrucciones página 3

The ActiveCaptain app downloads the update to the mobile device. This could take up to 30 minutes to complete.
5. Reconnect the mobile device to the dedicated Wi-Fi network on the trolling motor.
The update is transferred to the trolling motor. This could take up to 30 minutes to complete.
6. After the transfer to the trolling motor is complete, turn off the trolling motor.
7. Turn on the trolling motor.
After approximately 30 seconds, the motor speed indicator lights on the trolling motor display panel blink to indicate
that the software is updating.
8. Make sure the remote control is turned on and connected.
After the trolling motor software update is complete, if an update for the remote control is available, the speed
indicator lights blink, and a countdown begins on the remote control. At the end of the countdown, the remote
displays while it completes the update process. This could take up to 5 minutes to complete.
9. Make sure the foot pedal is turned on and connected.
After the trolling motor software update is complete, if an update for the foot pedal is available, the indicator light
on the foot pedal illuminates purple while it completes the update process. When the indicator light turns off, the
update is complete.
Service Alert 2088 Rev B.
© 2020 Garmin Ltd. or its subsidiaries. All rights reserved.
August 2020
SERVICE ALERT
‹
Page 3 of 33