Dolmar EC-2412 Manual De Instrucciones página 8

Noise
The typical A-weighted noise level determined according
to EN60745:
For Model EC-2412
Sound pressure level (
Sound power level (
Uncertainty (K): 3 dB (A)
For Model EC-2414
Sound pressure level (
Sound power level (
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
For Model EC-2412
Work mode: concrete cutting
Vibration emission (a
Uncertainty (K): 1.5 m/s
For Model EC-2414
Work mode: concrete cutting
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
8
ENG102-3
): 101 dB (A)
L
pA
): 112 dB (A)
L
WA
): 103 dB (A)
L
pA
): 114 dB (A)
L
WA
ENG229-2
2
): 2.5 m/s
h
2
2
): 3.0 m/s
h
2
ENG901-1
For European countries only
EC Declaration of Conformity
The undersigned, Tamiro Kishima and Rainer
Bergfeld, as authorized by Dolmar GmbH, declare
that the Dolmar machine(s):
Designation of Machine: Angle Cutter
Model No./ Type: EC-2412, EC-2414
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
30.1.2009
Tamiro Kishima
Managing Director
ENH025-3
Rainer Bergfeld
Managing Director