Sears Kenmore 116.22312 Manual Del Propietário página 7

CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is proper-
ly installed. See BAG CHANGING for
instructions.
3. Check to see that the motor safety filter is
properly installe& See MOTOR SAFETY
FILTER CLEANING for instructions°
HOOD
It is normal for the canister hood to come off
when opened further than needed° Line up
the hinge slots, insert them, and close the
hood to replace it.
HOSE
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place°
To remove: Lift
hose latch tab
upward and pull
up on hose,
Handle
Handle
Handle
Quick
Release
(Some
Models)
2. Insert handle into wand until lock
button snaps in place. Be sure hose is
not twisted.
To remove: Press handle release but-
ton and pull up on handle.
To store: Disconnect hose from wands
and canister to prevent stress on hose
during storage. Store hose in a loosely
coiled position so the hose covering is
not stressed.
Hose
Cover
Hood
Release
Dust Bag
Attaehment
Storage
7