Safety Symbols; General Safety Rules - Bosch GTC 400 C Instrucciones De Funcionamiento Y Seguridad

The definitions below describe the level of severity for each signal word. Please read the manual and pay
attention to these symbols.
Read all safety warnings, instructions, illustrations and specifications
provided with this tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "tool" in the warnings refers to your mains-operated (corded) tool or battery-operated
(cordless) tool.
Use and care
Use the correct tool for your application.
The correct tool will do the job better
and safer.
Protect the tool, particularly the area
around the camera and infrared lens, against
moisture and snow. The reception lens
could fog up and distort the measurements.
Incorrect settings on the tool and other
atmospheric influences
measurements inaccurate. Objects could be
depicted hotter or colder, which may present
a danger if touched.
High temperature differences in a thermal
image may cause even high temperatures
to be shown in a colour associated with low
temperatures. Coming into contact with such
an area may cause burns.
Temperature measurements will only be
correct if the emissivity setting and the
emissivity of the object match. Objects could
be depicted hotter or colder in temperature
and/or colour, which may present a danger if
touched.
Do not use the tool if the switch does not turn

Safety Symbols

This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
Read manual symbol - Alerts user to read manual.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
This symbol designates that this thermal camera tool complies with
Part 15 of the FCC Rules.

General Safety Rules

may make
it on and off. Any tool that cannot be controlled
with the switch is dangerous and must be
repaired.
Store idle tool out of the reach of children and
do not allow persons unfamiliar with the tool or
these instructions to operate the tool. Tools are
dangerous in the hands of untrained users.
Maintain tools. Check for misalignment or
binding of moving parts, breakage of parts
the
and any other condition that may affect the
operation. If damaged, tool repaired before use.
Many accidents are caused by poorly maintained
tools.
Use the tool, accessories, etc., in accordance
with these instructions and in the manner
intended for the particular type of tool, taking
into account the working conditions and the
work to be performed. Use of the tool for
operations different from those intended could
result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
-4-