Makita DHR242 Manual De Instrucciones página 7

Attaching the quick change drill
chuck
1
2
► 1. Spindle 2. Quick change drill chuck 3. Change
cover 4. Change cover line
Check the line of the quick change drill chuck shows
the symbol. Grasp the change cover of the quick
change drill chuck and set the line to the
Place the quick change drill chuck on the spindle of
the tool.
Grasp the change cover of the quick change drill chuck
and turn the change cover line to the
click can clearly be heard.
Selecting the action mode
Rotation with hammering
1
2
► 1. Rotation with hammering 2. Lock button 3. Action
mode changing knob
For drilling in concrete, masonry, etc., depress the lock
button and rotate the action mode changing knob to
the symbol. Use a tungsten-carbide tipped bit.
4
3
symbol.
symbol until a
3
Rotation only
1
► 1. Rotation only
For drilling in wood, metal or plastic materials, depress
the lock button and rotate the action mode changing
knob to the symbol. Use a twist drill bit or wood bit.
Hammering only
1
► 1. Hammering only
For chipping, scaling or demolition operations, depress
the lock button and rotate the action mode changing
knob to the symbol. Use a bull point, cold chisel,
scaling chisel, etc.
Notice on the action mode changing
knob operation
To avoid the damage to the mechanism of the action
mode changing knob, follow the procedures below:
• Do not rotate the action mode changing knob
when the tool is running.
• Make sure that the action mode changing knob is
always positively located in one of the three action
mode positions (
7 ENGLISH
, , or ).