9
Siting the cabinet
The DENSORB Station
Do not put the DENSORB Station inside a vehicle.
The DENSORB Station
When correctly installed, the wing doors should open and close easily.
We recommend that the DENSORB Station is secured to a load-bearing wall using the
mounting kit supplied.
10
Operation
3. Open the doors to remove DENSORB materials.
4. If necessary restock the DENSORB Station with DENSORB materials.
11
Maintenance and Care
The DENSORB Station is maintenance free.
If damage is noted which affects the safe use of the product, the DENSORB Station must be
removed from service immediately.
12
Disposal
The DENSORB Station is made from plastic and metal parts and is fully recyclable.
After decommissioning, follow local legislation when disposing of any waste.
BA_DENSORB-Station S+L_001_INT
must only be sited on an even, firm surface.
should be installed level at the position of use.
8 / 15
05/2014