Before Using For The First Time; Preparing Sandwiches - ECG S 099 3in1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
DESCRIPTION
1.
Stainless steel surface
2. Power On light (red)
3. Ready to Cook indicator (green)
4. Top lid
5.
Lid latch
6. Handle
7.
Thumb latches for changing the plates
8. Interchangeable sandwich plates
9.
Interchangeable triangle sandwich plates
10. Interchangeable grill plates
The red power On light is on if the sandwich toaster is connected to the outlet.
The green ready to cook indicator switches on as soon as the appliance is ready to cook.
The lid latch automatically secures the appliance upon closing.
GB

BEFORE USING FOR THE FIRST TIME

1.
Remove the packing material and all labels from the appliance.
2. Clean the toasting plates with a damp towel or sponge.
3.
Spread a piece of butter or a little oil over the toasting plates.
4. Plug the sandwich toaster into the outlet, the red power On light will come on. As soon as the green
ready to cook indicator comes on, the toasting plates are suffi ciently warmed up.
5.
The appliance is ready for preparing toasted sandwiches.
Note: When using the sandwich toaster for the fi rst time, a small amount of smoke may be given off . This is
normal for the internal parts of the product are being heated for the fi rst time.
CHANGING THE TOASTING PLATES
1.
After opening the sandwich toaster, press the thumb latches for changing the plates, loosen the plates
and remove.
2. Insert the interchangeable plates that you want to use by pushing them in until they click.
Do not replace the toasting plates while operating the appliance! The appliance must be cool and
disconnected from the outlet!

PREPARING SANDWICHES

1.
Prepare the fi lling for your sandwich. You will need two slices of bread and a suitable fi lling for each
sandwich.
2. To achieve an even better golden-brown color, you can smear some butter on the side of the bread that
is in contact with the toasting plate.
3.
Place the side of the bread slice with butter on to the bottom toasting plate, insert fi lling and cover the
with second bread slice with the buttered side up. Only one sandwich can be toasted on one toasting
plate at a time. For optimal results, make sure the fi lling is placed correctly between the slices of bread.
4. Carefully shut the top toasting plate on to the sandwich and fully close the sandwich toaster.
5.
Open the sandwich toaster after 2-3 minutes and check that the sandwich is suffi ciently toasted. If
you like a crispy and well-toasted sandwich, the length of preparation depends on the type of bread,
ingredients used and your own personal taste.
6. Do not use metal utensils for removing fi nished sandwiches. Do not use sharp kitchen utensils that
scratch.
7.
Unplug the cord from the outlet after you are fi nished using the sandwich toaster.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido