Using The Aux Input; Connecting An Auxilary Device; Selecting The Auxiliary Input; Using The Sleep Timer - PURE Contour 100Di Manual De Instrucciones

Using the aux input

Connecting an auxilary device

Connect the line out or headphone socket of your auxiliary device to the Aux-In socket on your
Contour 100Di using a suitable cable.

Selecting the auxiliary input

Press the Source button to select AUX.

Using the sleep timer

The sleep timer switches your radio into standby after a number of minutes has elapsed.

Setting the sleep timer

1. Press the Sleep button on the remote and repeat to increase the duration of the sleep timer
from 15 to 90 minutes.
2. Push Select, or wait to start the sleep timer.
The icon on the screen indicates when the sleep timer is set.
Tip Push the Sleep button again at any time to view the time remaining.

Cancelling the sleep timer

Press the Sleep button and set the timer duration to OFF.
EN
7