8.2 LIMITED WARRANTY
Your LED light source carries a 3-year warranty from the date of shipment on workmanship
and all defects of material. Should your product prove to have such defects within 3 year of
the shipment. Invuity, Inc. will repair or replace the product or component part without
charge. Should your LED Light Source need servicing under this warranty, please contact,
Invuity, Inc. for return authorization documentation and further instructions. Warranty does
not cover equipment subject to misuse, accidental damage, normal wear and tear or if
transferred to a new owner without authorization from Invuity, Inc. This warranty gives you
specific legal rights and you may also have other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
Invuity, Inc. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
•
•
•
9.
END OF PRODUCT LIFE
In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to
manufacturer at the end of product life.
10.
TROUBLESHOOTING
Problem
The power indicator (refer to
4.1) is not lit.
The power indicator is lit, but
lamp will not ignite.
LIT-168
Invuity
Rev. M
PH:
Fax:
Email:
Solution
A.
connected.
B.
Turn intensity control knob clockwise to increase light output
intensity
866-711-7768 Option 8
888-614-8954
customerservice@invuity.com
Check that the AC power cord is properly
Check the unit fuses. If necessary, replace.
Page 11 of 60
(English)