11.
TROUBLESHOOTING
Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but lamp will not ignite.
12.
CHART OF MEDICAL DEVICE SYMBOLS USED
®
LIT158 CUDA
SURGICAL
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light
output intensity
Manufacturer
Date of manufacture (YYYYMM
or YYYY)
"Authorized Representative" in
the European Community
Caution, consult accompanying
documents
Caution: Federal law restricts
this device to sale by or on the
order of a licensed healthcare
practitioner
Consult Instructions for Use
CE mark
Rev. C
Date of Revision:06/11/14
Page 12 of 68