For Best Results - Cooper Lighting MS100PG Manual De Instrucciones

FOR BEST RESULTS

• Install your fixture 6-8 feet above ground (motion detector is
less sensitive above 8 feet).
• Locate fixture so motion moves across detection zone (Fig. 1).
• Locate fixture away from heat producing sources to prevent
false triggering. Also be very careful not to include objects
such as windows, white walls and water in the detection
zone whenever possible.
• Locate fixture away from moving objects such as trees and street traffic.
HOW TO REPLACE BULB
Note: Unplug fixture before replacing bulb.
1.
Remove screw from the top of the lens frame and
carefully lower glass lens.
2.
Using gloves or a soft cloth, gently insert bulb by
pressing one end into the spring loaded socket and
repeat with the opposite end. Bulb should fit securely
contacts (Fig. 2).
3.
Secure lens frame onto fixture with screw.
Note: Bracket is not attached to glass.
MOUNTING YOUR FIXTURE
1.
Fixture should be unplugged.
2.
Fixture is already assembled with an
8´ cord, mount fixture to wall within 7´
of the electrical outlet.
3.
Mount fixture to wall using hardware
provided (Fig. 3).
4.
Mount fixture vertically not
horizontally (Fig. 4).
HOW TO OPERATE YOUR FIXTURE
Use Test Mode to Identify Your Detection Zone
1.
Activate test mode by turning both the light
control and light level knobs (with arrow slots)
counter clockwise toward "T" until they stop (Fig. 5.)
2.
Power up your fixture by plugging it in and / or
Call for customer service and/or missing or damaged parts (800-334-6871)
4
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
T