For Best Results - Cooper Lighting MS245 Manual De Instrucciones

• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: FCC Regulations state that any unauthorized changes or
modifications to this equipment not expressly approved by the manu-
facturer could void the user's authorization to operate this equipment.
SAVE THESE INSTRUCTIONS.

FOR BEST RESULTS

• Install the motion sensor 8-12 feet above ground
(motion sensor is less sensitive above 12 feet).
• Locate motion sensor so motion moves across
detection zone (Fig. 1).
• Locate sensor away from heat producing sources to
prevent false triggering. Also, be very careful not to include
objects such as windows, white walls and water in the
detection zone whenever possible.
• Locate sensor away from moving objects such as trees and street traffic.
• Do not install more than one motion activated floodlight on the same wall switch
or the same circuit.
MOUNTING YOUR LIGHT FIXTURE
WARNING: Risk of electric shock.
Disconnect power at fuse or circuit
breaker before installing or servicing.
Note: Junction box must be at least 1-1/2˝ in
depth for proper installation.
1.
Line up the holes on the mounting bracket with the
holes on your junction box. Using either (2) #6
screws or (2) #8 screws (depending on the size of
the holes in your junction box), attach the mounting
bracket to your junction box (Fig. 2).
2.
Thread fixture wires through coverplate gasket.
3.
Connect copper colored ground wire (coming from the
fixture coverplate) to the house ground wire using wire
nut provided. Connect fixture black wire to house
black wire, fixture white wire to house white wire using
wire nuts provided.
4.
Attach fixture to the mounting bracket using the center
bolt provided. Be sure no loose wires remain sticking
out from underneath the coverplate. Insert plastic
colormatched plug in center bolt hole for finished
appearance.
Call for customer service and/or missing or damaged parts (800-334-6871)
to the following standard
4
Your fixture mounts
junction boxes:
1-1/2˝ 1-1/2˝
Round Octagonal
(wall mount)
(eave mount)
Fig. 1
Fig. 2