Call Selection - BIRDSTOP BS-15 Manual De Uso

Call selection

The repeller has 8 calls built in and a number of preset programs
according to the list of sounds or alarms, chosen at time of purchase.
On the top side of the BS-15 there is sticker containing the specific list
of calls and preloaded programs.
The calls or program to be reproduced is selected by pressing the arrow
keys ( TRACK ). The display shows the corresponding track number
preceded by the letter (
After 20 sec. of inactivity, the repeller switches off the display and
enters power saving mode. Only one segment of the left display stays
on that shows the normal reproduction in rotation. When the device
enters TIME PAUSE, the left middle segment of the display flashes.
For all the calls (
preset operating time is 30 sec., while the pause time is 1 min.
These settings can easily be customised to your needs by following
the steps in the paragraphs
- RANDOM.
rd
The pre-loaded programs on your device (
based on field studies and the manufacture's experience.
The number and usage of the sounds varies according to the list that
the user can choose, depending on their specific needs.
Some programs have been created by including different types of
sounds or calls within a single selection. The sudden change of sounds
in a limited period of time has a major impact on pest birds, deterring
and warding them off.
The programs featured are calls optimised with preset times
that are not modifiable as they are created specifically to ward
off specific pest birds.
= call or
C P
- - etc.) built in the repeller, the factory
C1 C2 C3
- PLAY TIME,
tF
= program).
tP
- -
P1 P2 P3
- TIME PAUSE e
etc.) were created
37