Bluefin SUP iSUP Manual De Instrucciones página 2

Dear Client,
Thank you for your purchase and for choosing Bluefin SUP. We hope you enjoy your
product and choose to explore the full Bluefin SUP range. To get the best out of your
product, please consult this manual before use. Additional resources can be found via
www.bluefinsupboards.com
The Bluefin Electric iSUP Air Pump features an intelligent pressure system, with an
LCD screen allowing you to pre-set the pressure (via PSI or BAR) prior to inflation. Once
your desired air pressure has been reached, the pump will automatically stop inflating.
Pumping your SUP has never been so easy!
Team Bluefin
WARNING: Please follow the following safety precautions to
ensure safe operation of your Air Pump.
In order to reduce the risk of injury, please keep children away from the Air Pump
unless under close supervision.
Please ensure that the Air Pump is unplugged from its power source before
moving for any reason.
If the power cable shows any signs of damage, please discontinue use and
contact the manufacturer or an authorised technician for repair.
Avoid any direct contact with water and DO NOT use or touch the DC plug or
socket with wet hands.
Prior to use, please check the maximum recommended pressure for the item that
you wish to inflate.
Please check all sockets and connections regularly for rust or damage. In
the event of any rust or damage, please discontinue use and contact the
manufacturer or an authorised technician for immediate repair.
Only use the supplied and recommended 12V DC power adapter.
Don't block the air inlet and regularly check for blockages.
Regularly check the hose for damage and replace immediately if damaged.
Don't use the Air Pump for longer than 15 minutes to avoid the motor overheating
and any unnecessary damage.
Please do not leave the Air Pump unattended whilst inflating.
Please store in a dry and ventilated place.