Watching non-digital over-the-air TV broadcast
To continue to view non-digital TV broadcasts, if available, press the BOX
place the Converter Box in stand-by mode (amber light), then you can tune your TV to any
available non-digital channels (refer to your TV controls).
You must have the RF coaxial cable connected to your TV input, in order to watch non-digital
TV broadcasts. Note that most non-digital TV broadcasts will cease to be available after
Feb 17th 2009."
Closed captioning on the Converter Box
Closed captions allow people who are
deaf or hard of hearing to enjoy TV
programming. Captions are also a helpful
tool for those learning English or watching
TV in a noisy environment.
The Converter Box provides two ways for
you to view captions. You should choose
one method or the other.
Method 1
First, you can continue receiving standard
TV captions (basic white text on a black
background) through your analog TV
set. The Converter Box will automatically
send the closed-captioning information
to your television for the TV to decode
and display. All you need to do is turn ON
the closed captioning function on your
TV as you always have (if your TV has this
capability, as newer TV sets do.)
Method 2
Alternatively, the Converter Box can be
used to decode captions and display them
on your TV screen. If you use this method,
you will be able to enjoy the enhancements
made possible by digital technology.
To use the converter box to display closed
captions:
1. Turn OFF your television's closed-caption
decoder.
2. Turn on the Converter
Box's captioning
decoder by pressing the
CC button at the lower
right-hand side of the
remote control.
• When you use the converter box to
display closed captions in this way, you
can choose di erent types (languages) of
captions, depending on what information
broadcasters are sending.
12
Advantages of closed
captioning on the Converter
Box
Using the Converter Box to decode captions
gives you more choices and more exibility
when viewing captions on digital TV
shows. If you choose this method, you can
personalize your captions by making the
following choices:
• Choose text size for standard, large, and
small-sized captions
• Select di erent types of fonts
• Choose between eight background colors
and foreground colors for the captioning
text (white, black, red, green, blue,
yellow, magenta, and cyan)
• Make the caption background
transparent, translucent, solid, or ashing
• Set edges of font characters with raised
edges, depressed edges, uniform edges,
left shadow or right shadow
Each of these enhancements to standard
digital captions can be accessed from the
main menu of the Converter Box by pressing
the MENU button. Please refer to the next
section "Menu settings" for details.
To use Closed Captioning, please rst try
turning ON Closed Captioning feature on your
TV (this setting can normally be found in TV's
setup menu). If not satis ed with the results, try
turning OFF Closed Captioning feature on your
TV, and turning ON Closed Captioning feature
on your Converter Box.
Tip:
DO NOT enable closed captions on both TV
and the converter box. Otherwise, both
captions will be overlapped.
on your remote to
DTA800B1_IB_EN_E_V3