Functional Description - Milwaukee 1854-1 Manual Del Operador

SPECIFIC SAFETY RULES FOR
SUPER HOLE SHOOTERS
Safety instructions for all operations
• Use the auxiliary handle(s). Loss of control can
cause personal injury.
• Brace the tool properly before use. This tool
produces a high output torque and without properly
bracing the tool during operation, loss of control may
occur resulting in personal injury.
• Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
Safety instructions when using long drill bits
• Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the
bit tip in contact with the workpiece. At higher
speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in
personal injury.
• Apply pressure only in direct line with the bit
and do not apply excessive pressure. Bits can
bend causing breakage or loss of control, resulting
in personal injury.
• To reduce the risk of injury, when
WARNING
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Double Insulated
Volts
Alternating Current/Direct Current
Amps
No Load Revolutions per Minute (RPM)
UL Listing for Canada and U.S.
C US
Approval Mark for Mexico

FUNCTIONAL DESCRIPTION

10
9
10
8
7
10
6
1. Pipe handle
2. Chuck
(Cat. No. 1854-1)
3. Morse Taper Socket
(Cat. No. 2404-1)
4. Reversing switch
5. Trigger switch
6. Switch handle
7. Motor housing
8. Nameplate
9. Spade handle
10. Insulated gripping surfaces
3
Cat. No. 1854-1
1
2
5
4
3
4
5
Cat. No. 2404-1