Maytronics MBC8-UNI Instrucciones Para El Usuario página 7

5
Reassembling the filter elements
Insert the locating tabs at the bottom of the
filter element into their groves on the base frame,
then close the "S" clip.
Reinstall the filters according to the diagram
DO NOT FORCE THE FILTERS INTO PLACE.
Part 2 - Dismantling and cleaning the impeller
Unplug power supply before any servicing activity.
Dismantle the impeller cover and
clean around the impeller housing,
then reassemble.
1
Recommendation: Rinse all brushes with clean water after each cleaning cycle.
2
Locating tab
Locating tab groove
Grooved end fitting Octagonal end fitting
3
English