Blue Angel 50CJW Manual De Instrucciones página 2

Operating Instructions and Parts Manual
Convertible Well Jet Pump Water Systems
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing
all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Description
Jet pumps are single stage domestic water
pumps designed for pumping potable water
in applications where the water is up to 100
feet (deep well pump). A pressure switch is
a standard feature. A built-in control valve
is available on deep well pumps. Deep well
pumps can be mounted to either a pre-
charged, conventional type or free standing
pressure tank.
Unpacking
After unpacking the jet pump, carefully
inspect for any damage that may have
occurred during transit. Check for loose,
missing or damaged parts.
Safety Guidelines
This manual contains information
that is very important to know
and understand. This information
is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS. To
help recognize this information, observe
the following symbols.
Danger indicates an
imminently hazardous
situation which, if not avoided, WILL result in death or
serious injury.
Warning indicates a
potentially hazardous
situation which, if not avoided, COULD result in death
or serious injury.
Caution indicates a
potentially hazardous
situation which, if not avoided, MAY result in minor or
moderate injury.
Notice indicates
important information,
that if not followed, may cause damage to
equipment.
NOTE: Information that requires special
attention.
Blue Angel Pumps, Harrison, Ohio
© 2014,
®
General Safety
Information
CALIFORNIA PROPOSITION 65
including lead, known to the State of California to
cause birth defects and other reproductive harm.
Wash hands after handling.
GENERAL SAFETY
1. Read all manuals included with this
product carefully. Be thoroughly
familiar with the controls and the
proper use of the equipment.
2. Know the pump application,
limitations and potential hazards.
to match the system pressure rating and the
maximum flow rate.
or explosive fluids such as gasoline, fuel
oil, kerosene, etc. Do not use in explosive
atmospheres. Pump should only be used with
liquids compatible with pump component
materials. Failure to follow this warning can
result in personal injury and/or property damage.
from the system before attempting to install,
service, relocate or perform any maintenance.
Lock the power disconnect in the open position.
Tag the power disconnect to prevent unexpected
application of power.
prevent entrapment of swimmers.
3. Drain all liquids from the system
before servicing.
4. Secure the discharge line before
starting the pump. An unsecured
discharge line will whip and possibly
cause personal injury and/or property
damage.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.blueangelpumps.com
5. Check hoses for weak or worn
6. Periodically inspect pump and
This product
contains chemicals,
7. Personal Safety:
Always install
a pressure relief valve
8. Do not pump chemicals or corrosive
Do not use
to pump flammable
9. When installing pump, cover the well
Disconnect power
and release all pressure
10. Always test the water from the well
11. Complete pump and piping system
Install a screen
around the inlet pipe to
12.Do not run the pump dry or damage
installation only. Failure to install indoors will
significantly increase the risk of injury or death
from electrical shock.
condition before each use. Make
certain all connections are secure.
system components. Perform routine
maintenance as required (See
Maintenance).
a. Wear safety glasses at all times
when working with pumps.
b. Keep work area clean, uncluttered
and properly lighted replace all
unused tools and equipment.
c. Keep visitors at a safe distance from
work area.
d. Make the workshop child proof:
use padlocks, master switches and
remove starter keys.
liquids. Pumping these liquids
shortens the life of the pumps seals
and moving parts and will void the
warranty.
to prevent foreign matter from falling
into well and contaminating the water
and damaging internal mechanical
pumping components.
for purity before use. Check with local
health department for test procedure.
MUST be protected against below
freezing temperature. Freezing
temperatures could cause severe
damage and void the warranty.
will occur and will void warranty.
This pump is
designed for indoor
3400 00 -026 12/14