Publicidad
Idiomas disponibles
Idiomas disponibles
4 - ENGLISH
Ready Status
"POS.d" is the factory default "ready" status setting and
means the needle position setting is POSITION DOWN.
"POS.d" is "ready" status while default setting is not changed.
Once the needle position setting is changed to "POS.u" (which
means the needle position setting is POSITION UP), then
"POS.u" becomes the "ready" status.
Motor Rotating Direction Setting
Setting up Number 2
a. Keep "▼" button pressed for several seconds, until LED
display indicates "SET.0".
b. Press "▲" button 2 times. It will now indicate "SET.2", which
means "Setting up No. 2".
c. Press "▼" button until the LED indicates "roT.E" or "roT.P".
Press "▼/▲ " to switch between E and P, to meet the desired
requirement.
"E" means the motor will run in reversed direction.
"P" means the motor will run in normal direction.
d. Setting will be automatically saved 5 seconds after no buttons
are pressed. The motor returns to "ready" status.
www.endurosaves.com
default "ready" status
Either "POS.d" or "POS.u" will indi-
cate "ready" status, depending on
how the needle position is set.
alternate "ready" status
default "ready" status
Either "POS.d" or "POS.u" will indi-
cate "ready" status, depending on
how the needle position is set.
alternate "ready" status
Publicidad
