Epson OT-WL06 Manual De Usuario página 5

Unpacking
Connecting the Wireless LAN Unit
CAUTION:
Your printer's firmware must support this product in order to use it.
For more information, please refer to the following website.
For customers in North America, go to the following web site:
www.epson.com/support/
For customers in other countries, go to the following web site:
www.epson-biz.com/?content=um_otwl06
Confirm that the printer's power is off, then insert this product into the USB
connector (Type-A).
If it causes interference with other cables or poor transmission, connect via
the USB extension cable as shown in the figure. In that case, attach the
included rubber cover to prevent the product from becoming dirty. Also,
use the included affixing tape to affix the wireless LAN unit.
5