MTR S8 PRO Para El Usuario página 5

Installing Lens:
1. Select a correct lens shape for your goggle.
2. Insert the lens into the lens slots and engage the lens notches into the corresponding frame posts.
3. Make sure that the lens is correctly and fully inserted into the lens slot and that all lens notches
are properly engaged with the appropriate frame posts.
4. Peel o? the protective backing on the lens after complete insertion.
CAUTION!
The goggles are suitable for all kind of motorcycle and moped activities except official races and com-
petitions. This is not a safety goggle. This goggle is designed for motorsports use to protect from wind
and dust only. This goggle is not intended to, and will not protect you from impacts with hard objects.
Please always ride safely and in control.
This goggle for motorcycle and moped users is manufactured in conformity with the applicable basic
requirements of health and safety established by the Regulation EU2016/425, PPE Category II
Homologation
All declarations of conformity are available at www.louis.de
II. On the goggle is printed the following marking:
Reference Standard: EN1938:2010
Brand: MTR
Model name: S8 Pro (T7220)
Product certified by: CERTOTTICA, Zona Industriale Villanova, I- 32013 Longarone (BL), Italy (NB 0530)
Manufactured by: Detlev Louis Motorrad-Vertriebsgesellschaft mbH.
Address: Rungedamm 35, 21035 Hamburg Germany MADE IN TAIWAN