Safety Instructions; Cleaning And Maintenance; Technical Specifications - Perel Tools WCB1001 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the WCB1001 / WCB2001! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Before lifting, carefully inspect the hooks, the load chain, the brake device and the lubrication of the block. For your
own safety, strictly respect the following rules:
• Never lift a load exceeding the rated capacity of the chain block.
• Never stand or pass directly under the lifted load.
• Do not pull up the load too high or let go too far.
• Do not use the WCB1001/WCB2001 when the chain is kinked.
• Never drag the load so as not to strain the block. Place the load vertically under the block and lift.
• If the chain fails to move, do not pull the chain violently or by increasing the pulling force. Instead, stop the
operation immediately and control the chain block:
o Check if on object is blocking the chain.
o Have the parts checked.
o Make sure the load does not exceed the capacity of the device.
• Operate the device using manpower only.
• Make sure the chain block, the lubrication of the transmitting parts and the load chain are in good working order.
3. Operation
• Attach the load securely to the hook.
• Stand in the plane of the chain block. Remember never to stand or to pass under the lifted load.
• To lift the load, pull the hand chain in a steady motion. Do not tug at the chain.
• To lower the load, gently release the chain so the load lowers smoothly.

4. Cleaning and Maintenance

1. Store the chain block in a dry place.
2. Maintenance and inspection should be made by a skilled hand. Never allow any layman to assemble or
disassemble the block.

5. Technical Specifications

Chain
Capacity
The information in this manual is subject to change without prior notice.
WCB1001 / WCB2001
WCB1001 / WCB2001 – CHAIN BLOCK
3m
max. 1000kg (WCB1001) or max. 2000kg (WCB2001)
3 PEREL