Guidance and manufacturer's Declaration – Electromagnetic immunity
The Flocare
®
Infinity
™
enteral feeding pump is intended for use in the electromagnetic environment specified below. The
customer or the user of the Flocare
Immunity test
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
NOTE U
is the a.c. mains voltage prior to application of the test level.
T
Recommended separation distances between portable and mobile RF communications equipment and the
The Flocare
Infinity
enteral feeding pump is intended for use in an electromagnetic environment in which radiated RF
®
™
disturbances are controlled. The customer or the user of the Flocare
rence by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and
the Flocare
Infinity
as recommended below, according to the maximum output power of the communications equipment.
®
™
Rated Maximum output
power of transmitter
(W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in Watts (W) according to the transmitter manufacturer.
NOTE 1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
ZMNL900616_AW.indd 28
®
Infinity
™
enteral feeding pump should assure that it is used in such an environment.
IEC 60601 test level
Compliance level
3 A/m
Class 2 (3 A/m)
Flocare
Infinity
®
Separation distance according to frequency of transmitter (m)
150 KHz to 80 MHz
CD
d = 1.2
P
0.12
0.38
1.2
3.8
12
Electromagnetic environment – guidance
Power frequency magnetic fields should be at
levels characteristic of a typical location in the
typical commercial or hospital environment.
enteral feeding pump
™
Infinity
can help prevent electromagnetic interfe-
®
™
80 MHz to 800 MHz
CD
d = 1.2
P
0.12
0.38
1.2
3.8
12
-28-
800 MHz to 2,5 GHz
CD
d = 2.3
P
0.23
0.73
2.3
7.3
23
10/11/16 16:07