Steren MIX-308 Manual De Instrucciones página 17

10. PEAK
Indicates the signal level of some connected equipment (regardless of the output),
when the gain is adjusted (GAIN).
11. CHANNEL (for channels 1 - 8)
Adjust the channel volume.
12. PFL (for channels 1 - 8)
If the button corresponding to a channel is activated, it allows monitoring that channel
through the output for hearing aids (PHONES). In addition, the other channels are
automatically deleted.
13. Balanced outputs
Sends the mixed signal through separate outputs (left / right) of BNC, to connect
amplified speakers (baffles) or amplifiers.
14. Unbalanced outputs
Sends the mixed signal by separate outputs (left / right) of 6.3 mm, to connect
amplified speakers (baffles) or amplifiers.
15. AUX SEND 1 (jack)
Send the mixed signal through a 6.3 mm output to connect auxiliary amplifiers.
16. PHONES (jack)
Output to monitor, with 6.3 mm connection headphones, the mixed or individual
signal of each channel.
17. Level meters
Green LED
Yellow LED
Red LED
Output in optimal condition
Output in out of range condition
Output in exceeded condition
4